Tascam MMR-8 - Manual (Page 104)

TASCAM MMR-8 Owner’s Manual • Chapter 6 • File Format Support 104
301 Biphase Pulse Rate
Sets the frame rate used when the system is in Biphase Chase mode. Frame Rate choices are:
§ 2
Pulses per frame (ppf)
§ 4 ppf
§ 10 ppf (default value)
§ 20 ppf
§ 25
ppf
§ 50 ppf
§ 100 ppf
302 Biphase Input
Sets the type of Biphase input signal required for operation in Biphase mode. Choices are:
§ Biphase Input (default value)
§ Tach and Direction
§ Tach and Inverse Direction
400 Remote
These settings are used to control the behavior of the system while being remotely controlled by other
devices or controllers.
400 Editor Device
Sets the Sony 9-pin control personality while in the Edit control mode.
TASCAM MMR-8
This is the default setting. The TASCAM MMR-8 is the only setting which allows arming of all eight
digital tracks on the MMR. This is the default setting.
Sony PCM-7030
Emulates operation of a two-channel DAT machine. Only tracks one and two can be armed for recording
via the 9-pin port. All tracks can be armed locally or via the TASCAM MM-RC Remote Control Unit.
Sony BVU-950
Emulates operation of this ¾” video deck. Only tracks one and two can be armed for recording via the 9-
pin port. All tracks can be armed locally or via the TASCAM MM-RC Remote Control Unit.
401 Editor Auto EE
This setting allows input monitoring when the MM series unit’s transport is in Stop. The default value is
off.