Desa CDVBPC User Manual
Page 6
105501-01F
For more information, visit www.desatech.com
For more information, visit www.desatech.com
6
STOVE BODY ASSEMBLY
1.
Lift off corrugated box enclosing stove body crating.
2.
Remove all screws fastening the wood frame enclosure. Spread
wood frame open and lift away from plastic-bagged stove body.
The bottom pieces of pallet wood will remain bolted to the
stove body.
3.
Remove plastic bag from stove body.
4.
Remove back panel from stove (see Figure 6). Use an adjust-
able wrench or a 10 mm socket. Remove six (6) bolts and wash-
ers. Keep bolts and washers to reattach back panel later.
5.
Remove all contents from inside stove cavity. Contents include:
(1) - Stove bottom
(4) - Legs with leg leveler bolts
(1) - Bottom door
(1) - Top grate
(1) - Hardware kit bag with fasteners
6.
Carefully lay stove body on back to attach bottom components
to stove body (see Figure 7). Rest stove on drop cloth or blan-
ket to avoid scratching stove edges.
7.
Remove remaining pallet wood attached to bottom of stove
body (see Figure 8). Use an adjustable wrench to remove bolts.
CAST IRON STOVE AND
DIRECT-VENT BURNER
SYSTEM ASSEMBLY
8.
Fasten each leg to stove with four (4) M8 x 1.25 - 20mm bolts.
Use a flat washer and lock washer with each bolt. Tighten bolts
into threaded holes on stove body (see Figures 9 and 10). Use
an adjustable wrench or a 12mm socket.
9.
Fasten stove bottom to stove with four (4) M6 x 1 - 25mm
bolts. Use a flat washer and lock washer with each bolt. Tighten
bolts into threaded holes on stove body (see Figures 9 and 10).
Use an adjustable wrench or a 10mm socket.
CAST IRON STOVE AND DIRECT-VENT BURNER SYSTEM ASSEMBLY
Stove Body Assembly
Figure 7 - Laying Stove On Side
Figure 6 - Removing Back Panel
Bolt
Product
Identification
Label
Back
Stove
Panel
Pallet Wood Bolted to Bottom
of Stove Body
Front of
Stove
Unit
Top of Stove Unit
Front of
Stove Unit
Drop
Cloth/
Blanket
Figure 8 - Removing Pallet Wood from the Bottom of the Stove
Figure 9 - Locating Threaded Holes for Stove Bottom, Legs, and
Door Attachment
Top of
Stove
Unit
Pallet
Wood
Bolt
Pallet
Wood
Bottom Of
Stove Unit
Front
Door Hinge Step
Bolt Hole
Door Catch Bolt With
Adjustable Hex Nuts Hole
Leg
Hole
Leg Hole
Leg
Hole
Holes for
Attaching
Stove Bottom
Front
Bottom Of
Stove Unit
Figure 10 - Attaching Stove Legs
Bottom Of
Stove Unit
Leg
Bolt