Tech Source GFX 400 Series - Manual (Page 14)

GFX 400 Series Installation and Reference Manual
3-2
•
Ultra 10
•
Ultra 30
•
Ultra 60
•
Ultra 80
•
Ultra AX
•
Ultra Axi
•
Enterprise 250
•
Enterprise 450
•
Enterprise 2500
•
Enterprise 3000
NOTE: If your Sun PCI system is not listed here, please contact
Tech Source, Inc.
The following are prerequisites for installing the “GFX 400 Series
Driver Software”:
•
The system is running Solaris 2.5.1 or higher.
•
OpenWindows Version 3.5 or higher has already been
installed on the system.
•
At least 2MB of disk space is available in "/usr" and “/.”
•
One or more GFX 400 cards are presently installed in the
desktop/server.
NOTE: All device drivers are loadable. No kernel changes are
required.
3.3 Installing GFX 400 Series Driver
Software
This section describes software installation from a CD-ROM.
3.3.1 CD-ROM Installation
The following are step-by-step instructions for installing the “GFX
400 Series Driver Software” from a CD-ROM.
1.
Install a GFX 400 card in the computer as described in
Chapter 2.