Wireless security settings, Security profile configuration, Ireless – Teletronics EZBackhaul User Manual
Page 34: Ecurity, Ettings, Link aggregation
Link Aggregation
Link Aggregation combines two physical network links into a single logical link for increased bandwidth.
With it enabled, users can increase the capacity and availability of the communications channel between
devices (both switches and end stations). Besides, link aggregation also provides load balancing.
Open “
Basic” in “System”, Link Aggregation is as below:
Figure 17 Link Aggregation
Page 3
4
Full Duplex Two Channels: Normally, the wireless module in EZBackhaul receives and transmits
wireless packets concurrently; if check this box, it only transmits wireless packets on WLAN but stops
receiving. Thus the wireless performance could be enhanced further more.
Link aggregation takes effect only when both cards work on peer-to-peer mode!
Note: