Thermon TESH - Manual (Page 12)

INSTALLATION GUIDELINES SERIES HEATING CABLES PAGE 10
THERMON...The Heat Tracing Specialists ®
TEP0118U-1111
After possible re-adjustment, the cable can be
secured at 300 mm interval using SS tie wire/FT
fixing tape. The cable loops at heat sinks, valves,
pipe supports, etc. can be formed into position.
On small flanges and joints, where it is impractical
to bend the heating cable to achieve close contact
across the surface, the heating cable and flange
should be wrapped with aluminium foil. 5
4
300 mm
Installation of TES and MI cable