Thermon TESH - Manual (Page 19)

INSTALLATION GUIDELINES SERIES HEATING CABLES PAGE 17
THERMON...The Heat Tracing Specialists ®
TEP0118U-1111
Note:
- The heating cables should not touch or cross one
another.
- When prescribed in design apply aluminium tape over
the heating cable.
- Min. bending radius of the heating cable is 5-6 x cable
diameter.
- First mount the loop in the heating cable by means of tie
wire/fixing tape as shown.
- No heating cable to be installed on the manhole cover.
Installation on manholes
heating cable
FT fixing tape /
SS tie wire