Denon DCD-F102 - Manual (Page 11)

Operation
7
ENGLISH
ENGLISH
Turning the power on
[POWER OFF]
1 / 3
2
[TIME/DISPLAY]
< 5 > 2
1 / 3
<ON/STANDBY>
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Operation
Press <ON/STANDBY> .
• When the power turns on, the power indicator lights green.
¢ Turning the power off (to the standby mode):
Press <ON/STANDBY> again or [POWER OFF].
The power indicator turns off.
NOTE:
• To turn off the power while a disc is playing, be sure to press
2
to stop playback before turning off the power.
• When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
Loading discs
Press < 5 > to open the disc tray.
( page 2)
¢ To close the disc tray:
Press < 5 > again.
NOTE:
• Be sure to turn on the power when opening and closing the disc
tray.
• Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
• Do not insert foreign objects into the disc tray. Doing so will
damage it.
Starting playback
Press 1 / 3 .
• The “ 1 ” indicator lights and playback starts.
Once all the tracks recorded on the disc have been played, the
stop mode is set automatically.
[TIME/DISPLAY] can be used to switch the information displayed.
To stop playback
Press 2 during playback.
To pause playback
Press 1 / 3 during playback.
• The “ 3 ” indicator lights and the pause mode is set.
¢ To resume playback:
Press 1 / 3 .
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
Elapsed time of
currently playing
track Remaining time of
currently playing
track
Remaining time of all remaining tracks