Denon DCD-F102 - Manual (Page 19)

System Operations System Operations
15
ENGLISH
ENGLISH
• This function lets you record onto cassette tapes with automatic
editing according to the length of the tape.
• Load the CD and cassette tape before starting.
Edit function
Turn on the power of the various components.
Press MENU/SET three times in a row.
• “EDIT” is displayed on the receiver’s display.
1
2
Use [ 9 ] to set the length of the cassette tape.
Example: To record onto a 60-minute cassette tape, use [ 9 ] to
select “C-60”.
3
C – 46 C – 60 C – 90 C –
(The length of the cassette tape is the total length for sides A and B.)
• When the length of the cassette tape is set, the display alternates
between the track numbers to be recorded and the remaining time
for side A and the track numbers to be recorded and the remaining
time for side B.
A 0 1 - 0 9 - 0 2 : 4 0
Track number Remaining time
Press CD 1 / 3 .
• Recording of the CD starts.
4
¢ Setting a specific cassette tape length:
When “C –” is displayed, use [NUMBER] (1 ~ 10, +10) to input the
time.
Example: To set to 54 minutes
[+10] [+10] [+10] [+10] [+10] [4]
The length can be set to up to 99 minutes.
NOTE:
• The editing function does not work with discs containing 26
tracks or more.
• When using the edited recording function, be sure to load the
cassette tape with side A facing upwards. The beginning of the
cassette tape is found automatically before recording starts.
• When using a tape that is already recorded on, erase the tape
before conducting edited recording.
• When using the edited recording function, set the cassette
deck’s reverse mode to “ ”.
• In some cases it may not be possible to record all the tracks on
the cassette tape even if its length is longer than the total length
of the tracks on the disc, due to the fact that the tracks must be
divided between sides A and B. “OVER” is displayed on the
DCD-F102’s display if there are tracks that cannot be recorded. If
“OVER” is displayed, change the length of the cassette tape as
described in step
3 .
• When the editing function is in use, no buttons other than
<ON/STANDBY>, MENU/SET, [ 9 ], CD 1 / 3 , CD 2 , <TAPE 2 > and
[TIME/DISPLAY] will operate.
• With edited recording, blank sections approximately 4 seconds
long are automatically created between tracks. If you do not want
these blank sections, do not use edited recording.
• Edited recording is not possible with discs containing files in MP3
or WMA format.
Editing canceled
¢ Canceling the editing function:
Press CD 2 or <TAPE 2 >.