Dynacord Professional Power Amplifiers - Manual (Page 19)

rCM-26
19
the rcM-26 is a dual-channel digital controller
module for live sound, pa and fixed installation. it
offers all conventional signal processing functions
such as parametric equalizers, crossovers, delays,
compressors and limiters.
It also makes available linear phase FIR filters, zero-latency
FIR filters and digital loudspeaker protection algorithms
to permit the dynamic range of the amplifier to be
exploited to the full. In addition to the electronically
balanced analogue inputs of the power amplifier, digital
inputs in AES3 (AES/EBU) format are on board.
Using the CAN buss, networks of up to 250 power
amplifiers can be realized. Additional interfaces include
the RS-232 interface for medium control and the Control
Port with freely-programmable control inputs and
outputs (GPIO). Despite its compact dimensions,
the RCM-26 is unmatched in terms of its capabilities
and audio performance. The IRIS-Net Remote Control
Module RCM-26 extends the functionality of PowerH
power amplifiers by providing:
remote control
AES3 (AES/EBU) digital inputs •
digital signal processing •
loudspeaker protection algorithms •
system integration and networking •
linear 24-bit AD/DA converters •
sigma-delta 128 x oversampling •
dynamic range > 116 dB •
96 kHz sample rate, 48 kHz optional •
THD+N < 0.005% •
2 DSPs 150 MHz / 300 MIPS computational power •
48-bit double-precision algorithms •
RCM-26
Digital controller moDul for power h