Specifications, Xpa series operation – Dual XPA2100 User Manual
Page 11
11
XPA SERIES
OPERATION
Specifications
CEA-2006 Power Standard Specifications
(reference: 14.4VDC, 20Hz~200Hz)
Power Output:
200 Watts RMS x 1 channel at 4 ohms and < 1% THD+N
Signal to noise ratio:
72dBA (reference: 1 watt into 4 ohms)
Additional power output:
300 Watts RMS x 1 channel at 2 ohms and < 1% THD+N
Dynamic power:
600 Watts at 2 ohms
Frequency response:
20Hz~200Hz (-3dB)
Maximum input signal:
6V
Minimum input signal:
200mV
Speaker output impedance:
2~8 ohms
Bass boost:
0~12dB @ 45Hz
Crossover range:
40~200Hz, 12dB/octave
Power supply:
11-16 VDC, negative ground
Fuse:
20 amp ATO x 2
Amplifier dimensions:
13.69" x 2.13" x 9.17" (WxHxD)
(348 x 54 x 233 mm)
Typical installation dimensions:
16" x 3.25" x 9.17" (WxHxD)
(406 x 83 x 233 mm)
Design and specifications subject to change without notice.
XPA6100