Tri Tool 208B Miter Mandrel - Manual (Page 8)

8
TRI TOOL INC.
92-1497 : Orig. 100728
MATERIAL CUTTING CAPABILITY
Mild steels, chrome steels (Rc 35 max.), stainless steel, without limitations except
size and/or wall thickness specified under "Cutting Capacity".
Inconel and some other high-temperature alloys may require special procedures as
a function of wall thickness and type of end preparation. Contact TRI TOOL’s Engi-
neering Department for details.
ADJUSTMENTS
Angular Offset Adjustment
5° (Max. any direction)
Parallel Offset Adjustment
19” (4.8 mm) [Any direction]
MOUNTING
Four (4) jackscrews provide a ridgid, secure mount on irregular surfaces.
Jackscrews are actuated individually for centering in elbows.
ID Range
3.82” (97.0 mm) to 8.43” (214.1 mm)