Tri Tool 208B Flange Facer - Manual (Page 10)

10
TRI TOOL INC.
92-1495 : Orig. 100728
Attaching the Model 208B FF to the Model 208B
Mounting Screws
Model 208B FF
Tripper Block
Assembly
CONFIGURATION
Reference the Model 208B BEVELMASTER ® “Operators’ Manual” for setup instruc-
tions.
Check the position of the Tool Block.
Positioning the Tool Block
Turn the feed sprocket clockwise to feed the tool holder in.
The Tool holder feed travel is from OD to ID of the pipe.
Tool Block Adjustment
Loosen the hold-down screws on the adjustable slide rail.
Run the tool holder to the most outward position.
Using the adjustment set screw(s), apply a light force to the side of the ad-
justable slide rail so that it is in positive contact with the tool holder.