Tri Tool 212B Elbow Mandrel - Manual (Page 10)

10
TRI TOOL INC.
92-0262 : Rev. 970321
OPERATION
Correct pin length is
important for rigidity.
Use only the correct
Contact Pins specified
for each head size.
Pin
Length
Contact Pin at the
top of the elbow
radius
"B" maximum dia
"A" maximum dia
IN GENERAL
MANDREL SET-UP IN AN ELBOW
The Mandrel should be set-up in the elbow so that one pin contacts the inside
diameter of the elbow at the top.
This will help center the Mandrel.
OPTIONAL ACCESSORY
05-0357, Adjustable Centering Pin Kit.
The Kit is used, with the Standard Centering Pins, for centerline adjustment of the
Mandrel into the elbow.