Tri Tool 224B Single Point - Manual (Page 7)

7 92-0833 : Orig. 990603
Model 224B Single Point
Range, Beveling: 7.00” (177.8mm) DIA to 42.00” (1066.8mm) DIA
cutting range at 37.1/2°.
Bevel Angles: 0° to 37 1/2° graduated bevel angle adjustment.
Range, Flange Facing: 12.00” (304.8mm) DIA to 50.00” (1,270.0mm) DIA
cutting range.
Feed Travel: 5.0” (127.0mm) nominal (radial).
Alignment: When used in conjunction with the 224B Miter
Mandrel Head:
Angular - plus or minus 5°
Off set - plus or minus .19” (4.83mm)
Feed: 8 selectable positions between .005” (.127mm) rev.
and .032” (.803mm) / rev. inclusive
Cutting:
.200 max. cut depth / pass.
63 RMS finish may be obtained depending on material.
Spiral grooves as coarse as 31 grooves per inch when grooving.
Machines stainless and carbon.