Tri Tool 757RSS Hydraulic Power Supply - Manual (Page 12)

12
TRI TOOL INC.
92-0565 : Rev. 070912
WARNING:
DANGER:
OPERATION
Keep the control box door closed.
There IS 240 VAC, 380 VAC or 460 VAC within the system.
CONNECT THE OPERATOR’S PENDANT TO THE MODEL 757RSS
Be sure that electrical power has been disconnected to the Hydraulic Power
Supply before attempting to connect or disconnect the Operator’s Pendant.
Failure to do so will cause the fuse in the electrical box to blow as well as possible
damage to the connector on the Operator’s Pendant.
Connecting the various lines to the Model 757RSS
Before any operation takes place, inspect the quick disconnects for contamination
and clean if required when connecting hydraulic hoses.