DYSON CRO2 - Manual (Page 13)

End of wash cycle
The display will show ‘Programme finished’ once the
cycle is complete. Remove the washing and turn off
the machine by pressing the ‘Mains on/off’ button.
3
Start your wash cycle
Press to start your chosen
programme.
Pause your wash cycle
To pause the wash, for example to
add a forgotten item to the wash,
press the ‘Start’ button.
Press ‘Start’ once more to resume
the wash. When a programme is
paused, the door may remain
locked for safety reasons (see
section 01 for the door lock).
Cancel your wash cycle
To cancel the wash, press and hold
down the ‘Cancel’ button. The outer
door will unlock once the water has
drained away, and if the inner
door is cool enough (see section
01 for the door lock). 8
8
8887_CRO2_OPS_INNERS.qxd 5/11/03 3:27 pm Page 11