Triplett 9055 - Manual (Page 32)

30
Measuring Temperature (Room)
1. Place meter in the location to be measured. Allow meter
to set in this location for at least 1 hour.
2. Set the Function Switch to any position other than OFF.
3. Read Room Temperature from the LCD.
Note:
Select °C or °F readout using the “°C / °F Room “ Button.
Measuring Temperature (using probe)
1. Insert the black plug of the temperature probe into the
COM jack and red plug into the " V/Hz%/Ω/Cap/
Temp "
jack.
2. Set the Function Switch to °C or °F as desired.
3. Touch the tip of the probe to the object to be measured.
4. Read the temperature on the LCD.
Notes:
The included probe can measure up to approximately 300 °F
without damage. To measure higher temperatures, use a
high temperature probe.
If the ambient temperature of the meter is changed suddenly,
the meter may display erroneous readings until the meter
reaches the same temperature as its surroundings.