Triplett Fox 2 – PN: 3382 - Manual (Page 21)

21
nected to the other wire. This method is often used on tele-
phone, intercom, or alarm wires. The floating method tends
to cancel out some of the tracer tone, so a HOUND or HOUND
2 usually works best when the user has access to the wires,
and can place the HOUND or HOUND 2 right against the wires.
This method identifies the wires as a pair. It will not identify
which wire is connected to the FOX 2’s green clip or which
wire is connected to the red clip.
Figure 3
TRACER TONE
VISUAL CONT.
TALK
OFF / POLARITY
AUDIBLE CONT.
WARBLE PULSE
CORDLESS
INTERFACE
OVERLOAD PROTECTED
UNLOCK BATTERY TEST
AC / RING
TRIPLETT
REV NORM
PUSH
ON/OFF
– VOLUME +
Floating Method
(Line to Line)