TS Performance 8210202 - Manual (Page 6)

Installation: Power and Ground
5
Installation: Mounting
Power
1. Route the RED power wire from the module to clean 12
Volts, usually wired to the alternator on the passenger side
of the vehicle.
Ground
2. Route the BLACK ground wires from the module to clean
chassis ground or directly to battery, usually the alternator
on the passenger side of the vehicle is sufficient and easily
accessed.
6
Mounting location
1. You can mount the MPHD module anywhere away from
extreme environments. There’s plenty of room in the
harness to mount away from heat. The area just above the
valve cover has served for a great mounting location using
the supplied zip ties and/or velcro. Just be sure the module
is tightly secured to prevent damage.