VAUDE Mark 3P - Manual (Page 22)

15
flY:
TEAR-RESISTANT 40D POLYAMIDE RIPSTOP PU/SI;
WATERPROOF TO 3,000 MM.
• High resistance to tearing due to light but tensile
polyamide fabric with embedded strengthening
fibres
• PU/SI - Polyurethane coating to the inner surfaces
for maximum comfort due to reduced condensati-
on build-up. Triple silicon coating to the outer sur-
faces for increased tear-resistance, UV-resistance
and water run-off.
innEr TEnT:
30D POLYESTER RIPSTOP 285T.
• 285T – tightly woven ripstop polyester. Wind,
sand and snow proof with high tear resistance and
breathability.
15D POLYESTER 320T/20D POLYESTER FINE MESH.
• Ultralight material blend made from highly breath-
able mesh and wind resistant, tightly woven poly-
ester.
flOOr:
40D POLYAMIDE RIPSTOP 240T, PU LAMINATED, WATER
COLUMN 10,000 MM.
• Tightly woven with reinforced cross threads, tear
resistant polyamide floor with a laminated PU
membrane; waterproof up to 10,000 mm.
SafETY gUiDElinES:
• Please heed safety guidelines for all appliances
used in the tent.
• Always keep exits and throughways as well as
vent openings accessible.
• Find out what the rules and regulations are
for the campsite you are on and heed fire safety
precautions.
• Avoid hazardous materials inside the tent, such
as stove or automobile fumes (for example in the
Drive Base/Van).
• Wear your shoes around the tent. Stakes and other
anchors can be very sharp.
• Do not stake out the guy lines over paths or trails.
These can be easily tripped over in the dark.
ENGLISH