Quick set-up, Chapter – Verilink TAC 2130 S/T (880-503296-001) Product Manual User Manual
Page 17
Verilink TAC 2130 User Manual
2-1
Chapter
2
Quick Set-Up
This section details a quick, step-by-step procedure for configuring
the TAC 2130-T. For this quick configuration guide, the following
assumptions are made:
•
That you are using a TAC 2130-T with a fractional ESF/B8ZS T1
circuit.
•
That you are adding the TAC 2130-T to slot 10 of an existing
MLS 2200 shelf.
•
That the node is controlled by an NCC 2020 module located in
slot 1.
•
That timeslots one through twelve are to be used for the one
available data port on the TAC 2130-T.
•
That you are using a Cisco™ router for a connection to the
Internet.
Figure 2-1 Example Configuration
It is most likely that this procedure will not match your
configuration exactly. Use this chapter as a guide to the process of
installing your equipment. Chapter 3 provides complete details on
configuration covering all selectable options.
Cloud
Router
TA
C
2130-T