Verilink 1544 (CG) Configuration/Installation Guide - Manual

1554 Dual LIU Card Configuration Guide
Part Number 45-00010
Rev 1.00
T R A N S P O R T
®
1554 Dual LIU Card
Primary
Phone:
Date installed:
Chassis number:
Circuit number: Line 1:
Line 2:
Secondary
Name:
Contacts:
Date last serviced:
Slot number:
J1
3
Front Panel
(see other side)
1050 Chassis Rear View
J5
J6
J7
J1
J2
C14 C13 C12 C11 C10 C9 C8 C7 C6 C5 C4 C3 C2 C1 C15
J8
J9
J3
J4
36 35
2 1
Pin # Pinouts for C1 - C14
1 Network Out Tip - Secondary
2 Network Out Ring - Secondary
3 Network Out Tip - Primary
4 Network Out Ring - Primary
5 Equipment Out Tip - Secondary
6 Equipment Out Ring - Secondary
7 Equipment Out Tip - Primary
8 Equipment Out Ring - Primary
9 Network In Tip - Secondary
10 Network In Ring - Secondary
11 Network In Tip - Primary
12 Network In Ring - Primary
13 Equipment In Tip - Secondary
14 Equipment In Ring - Secondary
15 Equipment In Tip - Primary
16 Equipment In Ring - Primary
2
1
J2
3
2
1
J3
3
2
1
J4
3
2
1
S2
LBO
S4
LBO
0 dB
-7.5 dB
-15 dB
Current OFF
Current ON
TB1
P1 P2
1 to 2: Sealing
2 to 3: Sealing
0 dB
-7.5 dB
-15 dB
Mark your particular LBO
selection in these boxes.
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
36 35
2 1
The Dual LIU Card contains user options for setting the
LBO level and the sealing current. When the Dual LIU
card is used in conjunction with a 1557 card, it provides
the functionality of two industry standard ESF channel
service units. LIU cards must be used if the APS unit is
being connected to a Telco facility.
The LBO options (S2 and S4) are 3-position manual
slide switches with the marked values of 0, 7.5, and 15
dB. If unsure of the exact setting, then slide to 0 dB.
Do not option the LIU for SEALING
CURRENT ON if line power is being supplied from the
T1 facility to the LIU card(s). Damage to the unit can
result.
!
Location: