Watson-Marlow FF20 - Manual (Page 6)

OPERATOR’S MANUAL
Machine Type:
FF20
FF20 OM 1.01 EN.doc Page 6 of 24
4. INSTALLATION.
4.1. Assembly of FlexFeed 20.
During transportation the FlexFeed 20, the inlet and outlet trays and the filling stand are
dismantled and must therefore be re-attached to the FlexFeed 20 frame.
Fig. 1
Remove the cover plate (S) Fig. 1 via the two black finger screws.
Attach the inlet tray (T) Fig. 1 by Allen screws in the four holes in the frame.
Attach the outlet tray (O) Fig. 1 by Allen screws in the four holes in the frame.
Put the cover plate back in place.