Watson-Marlow FF20 - Manual (Page 9)

OPERATOR’S MANUAL
Machine Type:
FF20
FF20 OM 1.01 EN.doc Page 9 of 24
5. OPERATION.
5.1. Bottle adjustment.
5.1.1. Adjusting the outlet sluice
Fig. 5
Press the pneumatic stop button and the pressure is released from the system.
Loosen the two wing screws (A) so that the guide rail can be pushed forward and backward.
Place two bottles at each end of the longitudinal bottle sluice and adjust the guide rail at a
distance of about 1 mm to the bottles. Tighten the wing screws (A)
Check that all bottles run freely in the bottle sluice.
Note: when running with soft plastic bottles it is better if the distance is smaller so the
bottles move a little tight.