Watson-Marlow 624Di - Manual (Page 26)

Watson-Marlow Bredel E-Manuals
http://www.watson-marlow.it/pdfs-global/m-624Di-gb-01.htm[10/07/2012 13:59:15]
Dose (1)
N1. Switch on pump and Main menu is called .
O1. User chooses dose option.
P1. Recal program option available only if program has previously been saved.
Q1. User recalls a preset program. Large case letters denote a stored program
R1. Decision to set a new dose program.
S1. Enter dose volume in ml (0.001L<Dose<9999L).
T1. Enter dose weight in grams (0.001kg<Dose<9999kg).
U1. Set the specififc gravity of the fluid (Maximum 5.0).
V1. Dose is too small for pump (Minimum dose set should require 5 rotor revolutions).
W1. Dose is too small for tubing.
X1. Dose is ok for setup.
Y1. Set time interval between doses (0.1s<Time<6550s).
Z1. Set total number of doses (up to 9999 doses).
Dose (1)