WattMaster WCC III part 6 - Manual (Page 13)

WCCUTILITY.EXE SCREENS
WCC III Technical Guide 5-11
If you would like to clean one or more satellites of all their data,
select
<Clean Satellite> from the WccUtility Menu.
Satellite Number(s):
In the Satellite Number(s) fi eld, type in the satellite number(s)
you wish to clean. Separate satellite numbers with commas and
designate a range of numbers with a dash as shown in the Example
fi eld on the screen.
When you are ready, select <Start to Clean> . You will be able to
view the cleaning process in the data fi eld boxes.
If the system encounters any problems, it will display messages in
the message box at the bottom of the screen.
Select <Exit> to return to the WccUtility Screen.
CLEAN SATELLITE SCREEN
Clean Satellite Screen