Welltech SIPPBX 6200 V.x.2 Quick Start - Manual (Page 8)

Welltech Computer Co., Ltd.
Chapter 3 Step by Step Configuration for SIPPBX 6200
in Normal Mode
This chapter will go through the detail configuration of SIPPBX 6200 normal
mode.
I. Change SIPPBX 6200 IP Address
After successfully logon to the system (Default system Account/
Password: root/root) as figure 3.1, we need to change the SIPPBX 6200 IP
address. Clicking Control > Network to setup the SIP Service Interface
parameters as figure 3.2, enter the deserved IP address (e.g. 192.168.16.10),
subnet mask and default gateway as figure 3.3. Apply the change by clicking
Apply button.
Figure 3.1
SIP Service Interface
Figure 3.2
Figure 3.3
SIPPBX 6200 Quick Guide – V x.2 8