Welltech WellRec 5600 V.1.5 - Manual (Page 32)

Welltech Computer Co., Ltd.
WellRec 5600 - 32 -
Eventlog: show system log message
Command Purpose
[root#]eventlog ? Usage: eventlog [-clear]
Example: eventlog
eventlog -clear
[root#]eventlog
Show system eventlog:
Eventlog example:
Time: 2003-06-19 20:15:17 Event ID: 8700
Type:Warning Source : wellgate5x00
Description: [0]: evt: TRUNK ALARM: TrunkId=3
Time: 2003-06-19 20:15:17 Event ID: 8700
Type:Warning Source : wellgate5x00
Description: [0]: evt: TRUNK ALARM: TrunkId=2
Time: 2003-06-19 20:15:14 Event ID: 9501
Type: Information Source : wellgate5x00
Description: [0]: evt: BOARD STARTED: SLOT:8
Press any key to continue or press 'Q' to quit
[root#]eventlog -clear Clear all event log
Exit: Quit the current session
Command Purpose
[root#]exit Quit the current session
Ipconfig: Configuration or show network information
Command Purpose
[root#] ipconfig ? Usage: ipconfig [-network boardno][-delete dns] [-dhcp]
[-dns IPAddress1 IP
Address2 ] [-ip IPAddress -mask Mask -gateway
Gateway]
Example: ipconfig -network 1 -ip 192.168.67. 1 -mask
255.255.0.0 -gateway 192.168.5.254
example : ipconfig -network 1 -dhcp
example: ipconfig -network 1 -dns 192.168.1.1
example : ipconfig -network 1 -delete dns
[root#]ipconfig Show current network configuration
[Network 1] Local Area Connection
USE FIXED IP (or DHCP)
IP Address : 192.168.5.7
Subnet Mask : 255.255.0.0
Default Gateway: 192.168.5.254
DNS Servers :
[Network 2] Local Area Connection 2