Epson 836XL - Manual (Page 43)

Using Optional Equipment Page 43
3 To replace the strip cover:
◗ Insert the two tabs on one end of the cover into the two
corresponding slots in the holder.
◗ Swing the cover down, fitting the cover holes over the
pins on the holder.
◗ Snap the cover shut.
4 Repeat steps 1 through 3 for all the filmstrips you want to
scan.
5 Place the filmstrip holder on the document table with the
corner against the notch on the transparency guide. Align
the triangles on the filmstrip holder and the transparency
guide.