Wideye iSavi Terminal Instruction for calibrating Rev 1.0 - Manual (Page 6)

Instructions for Calibrating the iSavi
™
Terminal
© Addvalue Innovation Pte Ltd
6
8. Rotate your terminal in a clockwise direction around the Y-axis.
PLEASE NOTE: Depending on the strength of the magnetic interference, you may be
required to rotate the iSavi
™
terminal for more than one revolution in this axis.
9. Once the Y-
axis calibration has been completed, check that the ‘left’ and
‘right’ LEDs remain steady green and the ‘up’ and ‘down’ LEDs are
flashing green.