Wideye iSavi Terminal Instruction for calibrating Rev 1.0 - Manual (Page 7)

Instructions for Calibrating the iSavi
™
Terminal
© Addvalue Innovation Pte Ltd
7
10. Rotate your terminal in a clockwise direction around the X-axis.
PLEASE NOTE: Depending on the strength of the magnetic interference, you may be
required to rotate the iSavi
™
terminal for more than one revolution in this axis.
11. Once the X-axis calibration has been completed, check that all the four
Antenna Pointing LEDs remain steady green.
12. Once the calibration is completed, check that Verify Calibration Data
is displayed. All the four Antenna Pointing LEDs are flashing green.