AEC OS Series Gravimetric Batch Blenders - Manual (Page 81)

Page 80 of 118
The Printer Menu contains seven (7) options:
• Batch Interval
• Job Number
• Print Inventory
• Display Time & Date
• Set Time
• Set Date
• Test Printer
Note: If Printer option is enabled (turned on) and a printer is not connected
to the blender, the throughput will be significantly reduced!
5-8-28-1 Batch Interval or Timed Interval Printout
The Batch Interval item under the printout menu allows the
operator to set the number of batches between printouts or a
timed interval on the printouts.
Time Printout
When first entering the menu, the display will ask you for a
decision on whether the printout should be timed or by the
number of batches. The <START> key is used to toggle
between the two options.
If you want to print out on a time format, press the <ENTER>
key. The screen will then prompt to set the time interval in
hours.
If you want to change the hours between print outs, press the
<START> key to change the value to the desired time. Then
press <ENTER> to keep.
The screen will then scroll to a screen to program in when you
want to start the timed printouts. Simply select the time (24-
hour clock) and enter.
Print Out Scheduled At : 0:00
Press START to Change, ENTER to keep