AEC Colortronic MS Series Screenless Granulator - Manual (Page 15)

Chapter 2 Precautions for use
- 10 -
[WO-3531;ET 10]
3. Precautions of preparations for operation
Heading Item Precautions
WARNING
ANTI-RUST AGENTS
(AGR) Only in delivery, after glove wears, wipes up AGR (Oil) that is
applied inside the unit by drying cloth after confirming the
blocking-off of your primary power.
※
Be sure to wears a glove so as not to cut a hand with cutter.
CAUTION
Caster Be sure to do two locks of caster except that you move
granulator.
CAUTION
Reusing crushed
material When using the crushed material after delivery in first, there is
possibility that the foreign material of AGR (oil) and the fine
particle, etc. is mixing.
As for the crushed material in initial and in set changes, surely,
reuses after check if AGR (oil) and the foreign material are
mixing in the crushed material.
4. Precations for operating
Heading Item Precautions
DANGER
Feed hopper
lower part of granulator
Don't insert a hand to the inside of feed hopper and the
lower part of granulator during the operation.
The rotating cutters are made sharply. Don't touch it during the
stop as well.
DANGER
Feed hopper
Don't peep into the inside of feed hopper during the operation.
Plastic material scatters, and has danger that is hit to the face.
WARNING
Feed runner Insert a single runner only.
It causes cutter damaging and trouble when many runners are
inserted.
WARNING
Control box Don't open control box except for the necessity.
It has the danger of electric shock, and causes trouble and
accident.
Then, don't add a strong shock, and don't shower water.
These acts become the cause of trouble and fire.