Airlink RT210W - Manual (Page 17)

Wireless Broadband Router User Manual
7
Ø Reboot. Insert a straightened paperclip into the reset
hole to press the button. This will reboot the Wireless
Broadband Router.
Ø Restore to the factory defaults. Insert a straightened
paperclip into the reset hole to press the button. Keep
pressing and power cycle (off and on) the device. Wait
for at least 5 seconds to release the button. Then wait
for the device to finish booting. This operation erases all
previous settings entered by the administrator.
2.2 Hardware Connection
Choosing a Place for the Wireless Broadband Router
•
Place the device close to the power outlet for the cable to
reach it easily.
•
Avoid placing the device in places where people may walk
on the cables.
•
Keep the device away from direct sunlight or heat sources.
•
Place the device on a flat and stable stand.