Airlink RT210W - Manual (Page 60)

Wireless Broadband Router User Manual
50
provided by the ISP.
•
For cable users, if your ISP requires a registered Ethernet
card MAC address, make sure you have cloned the
network adapter’ s MAC address to the WAN port of the
router. (See the MAC Address field in WAN page.)
My wireless client cannot communicate with another Ethernet
computer.
•
Ensure the wireless adapter functions properly. You may
open the Device Manager in Windows to see if the adapter
is properly installed.
•
Make sure the wireless client uses the same SSID and
security settings (if enabled) as the Wireless Broadband
Router.
•
Ensure that the wireless adapter’ s TCP/IP settings are
correct as required by your network administrator.
•
If you are using a 802.11b wireless adapter, check that the
54g
TM Mode item, in Wireless LAN (2.4G) page, is not
configured to use 54g Performace.
•
Use the ping command to verify that the wireless client is
able to communicate with the router’ s LAN port and with the
remote computer. If the wireless client can successfully
ping the router’ s LAN port but fails to ping the remote
computer, then verify the TCP/IP settings of the remote
computer.