EverFocus Day / Night Speed Dome Camera EPTZ 100 User Manual
Page 28
EPTZ100_ma_en_rev03.doc
28
some blue or reduce some red; if lighting is fluorescent or within white
spectrum, try to either add some red or reduce some blue.
Default values are 30 (for RED) and 40 (for BLUE); it is recommended
not to set the values too far away from these two default values.
BACKLIGHT
Back light compensation improves the image quality in scenes with extreme light behind the
object which usually washes out the image considerably. Back light function is used to
reduce, if necessary, both exposure time and video gain to avoid over-exposure.
Use the back light compensation for sceneries with back light only; under normal light
conditions, the BLC may impair the image quality.
OFF
BLC not active
LOW; MIDDLE; HIGH Levels of BLC gain. Set the level as low as possible to avoid
overmodulation.
MOTION DET
EPTZ 100 does not support this feature. Please leave the setting on OFF.
FOCUS
Submenu for setup of focus modes and features:
ONE_PUSH The one-push function focuses the lens after each pan / tilt / zoom
operation and turns autofocus off after focusing.
This mode is recommended for most applications.
AUTO
The AUTO mode enforces the lens to automatically adjust its
focusing when either the object moves or the scene has changed.
NOTE: The autofocus function requires adequate illumination of the
scenery. Especially in low lux environment, it is recommended to use
the "One Push" autofocus mode, not the "AUTO" mode.
MANUAL
Manual mode to finetune and obtain the optimum focusing.
In certain conditions, such as weak contrast, dark sceneries etc., the
autofocus function of the camera may not get the best focus position.
In such case, the focus can be adjusted manually.
ZOOM TRK Zoom tracking - with setting ON, the lens tries to keep focus also
during zoom in / zoom out operation.
Dependencies zoom modes:
One-Push AUTO
Manual
Focus
Mode
ZOOM-TRK ZOOM-TRK ZOOM-TRK
Action ON
off
ON
off
n/a
off
Change in scene
no action
no action focusing
focusing
no
action
Zooming
focusing focusing
at stop
focusing focusing
focusing
at stop
Pan/Tilt
& tilting
focusing at
stop
focusing
at stop
focusing
focusing
no
action
Go to Preset
focusing at
stop
focusing
at stop
focusing
focusing
no
action
ZOOM SPEED
Zoom speed setting: FAST or SLOW
D-ZOOM
Value for maximum digital zoom ratio LIMIT x2 ~ x10
DISP ZOOM MAG
ON: Overlay display of zoom position on the screen