Allmand Brothers Allmand 7.5 FT BACKHOE - Manual (Page 3)

3
INTRODUCTION
This manual provides operation, maintenance, assembly and parts iden-
tification for your new backhoe.
Your backhoe has been designed to give many years of satisfactory
service. Successful operation and long life of the backhoe depends on
proper maintenance and operation. Please read this manual carefully and
follow all instructions. Correct assembly, operation and maintenance will
save you much time and expense.
NOTE: This safety alert symbol identifies important safety
messages in this manual. Observe and follow all safety
messages to prevent personal injury.
Reference to left-hand and right-hand used in this manual refers to posi-
tion of operator when seated in the operating position of backhoe.
If at any time you have a service problem with your backhoe or need new
parts, contact your local dealer. Your dealer will need your backhoe serial
number to give you prompt efficient service.
Parts orders must give complete description, correct part number, total
amount required, all necessary serial numbers, method of shipment and
shipping address.
There are three levels of hazard intensity identified by signal words
DANGER, WARNING and CAUTION. The level of hazard inten-
sity is identified by the following definitions.
DANGER - Immediate hazards which will result in severe injury
or death.
WARNING - Hazards or unsafe practices which could result in minor
personal injury or property damage.
CAUTION - Hazards or unsafe practices which could result in minor personal injury or property damage.