Allmand Brothers Allmand 8.5 10 FT BACKHOE - Manual (Page 22)

22
OPERATING INSTRUCTIONS
TRANSPORTING
G
GENERAL INFORMATION
Follow the simple steps listed below when preparing the backhoe for trans-
portation between work sites. Read and follow the safety precautions for backhoe
transporting listed in Section B of this manual before moving the backhoe.
1. Before transporting the backhoe, raise the boom, dipper, and bucket to the
transporting position.
2. Engage the swing lock (if so equipped) by pushing down and to the left on
the red swing lock ball handle.
3. Engage the boom lock by moving the boom lock handle to the left/down
therefore locking the boom to the swing post in the transporting position.
4. Raise all stabilizers.
CAUTION! Be sure to install a SMV (Slow Moving Vehicle) sign on the
backhoe dipper before attempting to transport the backhoe.
When transporting the backhoe on a road or highway at night
or during the day, use accessory lights and devices for ad-
equate warning to the operators of other vehicles. In this re-
gard, check local government regulations.
Always drive slowly over uneven terrain to avoid tipping the
backhoe.