Aqua Lung Dimension i3 / Lotus i3 BC User Manual
Page 13
English
© 2012 Aqua Lung International
BC
Home
5. Place the fitting over the quick disconnect plug and
firmly push inward while releasing the hose grip. Check
to ensure the hose is securely attached.
NOTE:
BC’s using the i3 system are equipped with longer then normal MP inflator hoses. It is
very important to us the inflator hose provided with your BC (if the hose is too short it will not
reach the i3 control unit).
6. To test the connection, slowly open the cylinder valve and pressurize the regulator. Lift up on the
lever and listen for the flow of air into the BC bladder.
Hose lengths are as follows:
XXS/XS/SM - 27 inches (68.5 cm) (pn 44827)- Red
M/ML/L - 33 inches (84 cm) (pn 44833) - White
XL - (Dimension i3 and Axiom i3 only) 36 inches (91.5 cm) (pn 44836) - Blue
XXL - (Axiom i3 only) 40 inches (101.5 cm) (pn 44840) - Lt Gray