Aquatic AV AQ-DM-2BX - Manual (Page 9)

TM
iPod Charging
TM
When specified iPod devices are connected to the AQ-DM-1R 30 pin
TM
connector, iPod battery will charge.
8
Amplifier Sleep Mode
TM
The Digital Media Locker's power amplifier will automatically go into "Sleep"
mode in about 5 minutes of no audio sensing. For applications with the 12V
independent battery operation, this will extend the battery life. Maximum
power drain during "Sleep Mode" is 10mA.
In any operational mode, press the lightning bolt (12V
TRIGGER) key to activate. Press again to deactivate.
We strongly recommend you to speak with our tech service staff or your
dealer if you're are considering to activate this feature. 2.
External Trigger
1. MHz
EXT
OTHER FEATURES
Aquatic AV understands the need for more flexible remote applications. With
the Digital Media Locker, Aquatic AV has provided an independent 12V
"accessory" trigger, activated by the RF Wireless Remote that provides user
to activate non-iPod, MP3 related devices. This could include any 12V based
devices like 12V lights or surveillance camera.
Remote Control LCD Auto OFF
To maximize battery life of the RF Wireless Remote Control, the LCD of the RF
Wireless Control remote will be OFF if no key is pressed in 10 seconds. To
re-activate the LCD display, press
(POWER) once to bring the remote
control to normal operation.
Load on External Trigger should not exceed 300mA.
To avoid rusting as a result of electrical potential in the connector, the battery
TM TM
of your iPod devices must not be totally drained. If your iPod is not
charged at all then the unit will not charge it.