ARAG Electriccontrol unit for crop-spraing application 871 - Manual (Page 4)

4
1 PRODUCT DESCRIPTION
ARAG electric control units for crop-spraying applications consist of individual, modular-design
electric valves.
When installed on crop spraying machines, they ensure regular distribution of pesticides.
This booklet describes all the various parts that may be included in the unit.
Some of these parts may not be included in your unit. Likewise, given the modulari-
ty of the product, some types of parts may not be assembled together but are only
alternatives for others.
The illustrations in this booklet are, therefore, provided only as indications.
For detailed information, please refer to the description of the part in question and
not of the unit in general.
ARAG is not liable for any damage caused directly or indirectly by the type of fluids
used for spraying by its control units.
The operator has full liability for the use of these products and therefore must verify
the safety regulations indicated on the package by the manufacturer of the liquid
and must wear suitable protective clothing (gloves, overall, footwear, helmet, etc.)
as required by law.
ARAG is therefore not liable for any damage or injury to persons, animals or things
as a result of the incorrect use of the products employed, without protection or con-
trary to recommendations.
1.1 Intended use
This device is designed to work on agricultural machinery for spraying and crop
spraying applications.
The machine is designed and built in compliance with EN ISO 14982 standard
(Electromagnetic compatibility - Forestry and farming machines), harmonized with
2004/108/EC Directive.