ARM Electronics MP13DVPDN - Manual (Page 60)

59
7.4.3 Video OCX Protocol
In the Video OCX protocol setting page, users can select RTP protocol using
UDP or TCP transport, for streaming media over the network. In the case of
multicast networking, users can select the Multicast mode. The page is shown
as follows.
Video OCX protocol setting options include:
• RTP over UDP/RTSP(TCP)
Select a mode according to your data delivery requirements.
• Multicast Mode
Enter all required data, including multicast IP address, MPEG-4 video
port, MJPEG video port and audio port, into each blank.
Click “Save” to confirm the setting.