Epson S01-00 - Manual (Page 27)

2-8 Using EPSON Photo!3
L Proof Sign-off:
E. Omori
_______
M. Fujimori _______
K. Pipa _______
EPSON Photo!3
Rev. C3
A5 size CHAP2.FM
9/8/99 Pass 0
2. Open the document or file where you want to use
the photo.
3. For OLE2-compliant applications, position the
cursor where you want to insert the photo, choose
Object
from the Insert menu and double-click
EPSON PhotoPC 800 Object in the Object Type
list box.
For TWAIN-compliant applications, select
EPSON PhotoPC 800
(or PhotoPC 800 for
Macintosh) as the TWAIN data source, then
acquire the image.
Note:
The process for accessing EPSON Photo!3 from
TWAIN or OLE2-compliant applications may vary
depending on your software. Please refer to your
software documentation for detailed instructions.
4. In the EPSON Photo!3 Camera menu, click the
thumbnail of the image you want to use, then click
the Get Photo (or Get Photos) button. A copy of
the picture appears in your document.
Note:
❏
If you want to rotate an image, select the image
and click one of the rotation buttons.
❏ If you want to improve the image quality of your
photos, select the PhotoEnhance check box
before clicking Get Photo (or Get Photos).
Transferring takes longer when using this feature.
Using drag-and-drop (Windows only)
Following is a typical procedure for transferring a
photo to any Windows application that supports
OLE2 (object linking and embedding).
1. Make sure EPSON Photo!3 is open.
2. Start your word processor or other application.
3. Open the document or file where you want to use
the photo.
4. Arrange your screen so that both the application
window and the EPSON Photo!3 window can be
seen.
5. In the EPSON Photo!3 Camera menu, click the
thumbnail of the image you want to use.
Note:
If you want to rotate an image, select the image and
click one of the rotation buttons in the Camera menu.