Eneo PXD-2080MIR D - Manual (Page 10)

10
• If the Information message doesn‘t come out due to the problems like network
failure, you can start the manual installation.
• Click the Install ActiveX Control, and the pop-up window will be displayed. After
the installation is successfully completed, Smart Viewer window will be displayed.
Assigning an IP address
To assign an IP address to the camera proceeded as follows: Click Network Configuration
on the Network Configuration menu.
• Depending on the service type, the network configuration can be in any of Static
IP, DHCP Client, or PPPoE. You need to set up the network camera according to your
network type.