Eneo PXD-2080MIR D - Manual (Page 12)

12
• PPPoE is used to connect IP products to PPPoE modem provided by ISP. Since
PPPoE needs verification, ID and password are necessary to access network. Type in
ID and password.
Administrator password
To change the password for the administrator, click Admin Password on System Configu-
ration menu.
• Default ID for admin account is fixed as “root” and not allowed to change. In Old
Password field, enter the current password. In both New Password and Confirm
Password fields, enter the same new password.
• The password must be between 4 and 23 alphanumeric letters. Click Apply to put
it into effect. Because you have replaced the password with a new one, the existing
network connection made with old password now is lost.
• You will have to reconnect for using the new password.