Eneo PXD-2030PTZ1080 - Manual (Page 10)

9
4. Access Camera
The network Speed Dome Camera’s default IP address is: 192.168.1.10.
Therefore, to access the camera for the first time, set the PC’s IP address as:
192.168.1.XXX; for example:
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
Login ID & Password
• Key in the camera’s IP address in the URL bar of the Web browser window and
press “Enter.”
• Enter the default user name (admin) and password (admin) in the prompt
request dialogue.
Note that user name is case sensitive.
Installing DC Viewer Software Online
For the initial access to the camera, a client program, DC Viewer, will be
automatically installed to the PC when connecting to the camera.
If the Web browser doesn’t allow DC Viewer installation, please check the
Internet security settings or ActiveX controls and plug-ins settings (refer to
chapter Appendix C: Setup Internet Security ) to continue the process.
The Information Bar (just below the URL bar) may come out and ask for
permission to install the ActiveX Control for displaying video in browser.
Right click on the Information Bar and select <Install ActiveX Control…> to allow
the installation. A security warning window will pop up. Click on <Install> to carry
on software installation.