Ensemble Designs 4500 ASI and SMPTE 310M Converter and MPEG Transport Processor - Manual (Page 15)

www.ensembledesigns.com 4500-15
Model 4500 MPEG Stream Processor
DVB-ASI
310M
Remote
Local
Run
Pwr
4500
MPEG
Stream
Processor
Ref
In
pu
t
ASI/310M
Genlock
On
O
ut
Front Panel Controls and Indicators
Each front edge indicator and switch setting of the 4500 is shown in the diagram below:
DVB-ASI green LED:
ON when input is DVB-ASI.
OFF when no DVB-ASI signal is
present in the input. The module
auto-senses what type of signal
is on the input and converts as
needed.
310M green LED:
ON when input is 310M.
OFF when no 310M signal is
present in the input. The module
auto-senses what type of signal
is on the input and converts as
needed.
Remote/Local switch:
Set to the mode you wish to use:
Up for Remote mode and down
for Local mode.
Run green LED:
OFF A power fault or halted CPU
ON A halted CPU
FAST BLINK CPU Run error
SLOW BLINK System OK. (If SPI
control is active from the main
frame System Control Module, all
Run indicators will be
synchronized.)
Pwr green LED:
Indicates the presence (ON) or
absence (OFF) of power (+5V).
ASI/310M switch:
Select ASI (left) to select ASI as
the output, or 310M (right) to
select 310M as the output.
Ref green LED:
ON when Reference input is
detected and locked.
OFF when no Reference input is
detected.