Ensemble Designs 9400 3G Test Signal and Sync Pulse Generator - Manual (Page 19)

www.ensembledesigns.com Avenue 7400 and 9400 - Page 19
Model 7400 HD/SD and Model 9400 3G/HD/SD Sync Pulse Generator and Test Signal Generator
Connecting the Cables between the 7400-GPS Option Submodule and the
7400 or 9400 Main Module
Connect the three coaxial cables as shown in the photo below. Note that for each of these cables the
main module and the submodule have matching labels:
• 10M submodule connects to 10M main module
• ANT submodule connects to ANT main module
• PPS submodule connects to PPS main module
Connect the power/control cable as shown in the photo below. Note how the ribbon cable connects,
and the orientation of the red band which indicates pin 1.
7400-GPS Option cabling detail