Ensemble Designs BrightEye 70 HD/SD AES Embedder/Disembedder - Manual (Page 11)

Demultiplexer Mode
When the module is set for Demux, the Input menu provides the controls
shown below.
• Group A Status – the status of the .audio selected in
Group A Select will be displayed as Off, No Audio Present,
Group1 OK, Group 2 OK, Group 3 OK, and Group 4 OK.
• Group B Status – the status of the .audio selected in
Group B Select will be displayed as Off, No Audio Present,
Group1 OK, Group 2 OK, Group 3 OK, and Group 4 OK.
• Group A Select – select the audio group to demultiplex from Group
1, Group 2, Group 3, Group 4, or Off for either control.
• Group B Select – select the audio group to demultiplex from Group
1, Group 2, Group 3, Group 4, or Off for either control.
• AES 1/2, 3/4, 5/6, 7/8 Status – in Demux mode, the AES inputs will
report the all AES audio status as being in Output Mode