Ensemble Designs BrightEye 71 HD/SD 8 Channel Analog Audio Embedder/Disembedder - Manual (Page 11)

www.ensembledesigns.com BrightEye 71 and 71-F - Page 11
HD/SD 8 Channel Analog Audio Embedder/Disembedder User Guide TM BrightEye 71 and 71-F
Config Menu
• Input Pres – indicates the presence of an HD or SD SDI input. One of the following values will
be displayed: 720p/50, 720p/59.94, 720p/60, 1080i/50, 1080i/59.94, 1080i/60, 1080p/25,
1080p/23.98, 1080p/24, 1080p/25, 1080sF/25, 1080sF/23.98, 1080sF/24, SD 525, SD 625,
No Input, or Unknown.
• Audio Mode – select the mode of the module as Mux or Demux.
• Mux Mode – select the type of multiplexing desired from Mux Replace or Mux Cascade.
• Dig Ref Level – select the digital reference level. This pulldown lets you choose between:
-20 dBFS or -18 dBFS.
• Peak Indicator – select the amount of headroom to use in determining peak levels. This
pulldown lets you chose between: Clipping, 2 dB Headroom, 4 dB Headroom,
6 dB Headroom, 8 dB Headroom, or 10 dB Headroom.
• Anlg Ref Level – select the analog reference level. This pulldown lets you choose between
-10 dBu or +4 dBu.
• Audio Delay – allows you to set the amount of audio delay from 0 to 1000 mSec. Default is
0 mSec.
• Strip Audio – when On all audio and EDH is stripped from the incoming stream. Off leaves
audio and EDH as it comes in on the input signal.